No doubts about it, a table saw is one of the most important tools a wooed worker can have in its garage. There are dozens of models on the market and after reviewing a lot of them we can say that it is more than complicated to take the right decision. Therefore, if you are looking at buying a quality machine, but you have no idea about their features, construction, design and so on, below is a comparison table specially made for people like you. In this comparison chart, you will find detailed information about the best models in 2018.

Top 5 Table Saws Comparison

1. DEWALT DWE7491RS 2. Bosch 4100-09 3. Makita 2705 4. Bosch GTS1031 5. SKILSAW SPT70WT-01
BEST MODEL OUR CHOICE
Check Price Check Price Check Price Check Price Check Price

Design

Manufacturer DeWALT Bosch Makita Bosch SKILSAW
Model DWE7491RS 4100-09 2705 GTS1031 SPT70WT-01
Dimensions 24.5 x 31 x 31 in 39.13 x 30 x 20.9 in 26¾ x 30¼ x 13½ in 22.5 x 22.5 x 13 in 23.4 x 19.9 x 13.4 in
Weight 90 lb 60 lb 64 lb 52 lb 49 lb
Power Tool Type Corded Corded-electric Corded Corded-electric Corded-electric

Specifications

Amps 15 amps 15 amps 15 amps 15 amps 15 amps
Blade diameter 10” 10” 10” 10” 10”
Depth of cut at 90° 3-1/8 in 3-1/8 in 3-9/16 in 3-1/8 in 3-1/2 in
Depth of cut at 45° 2-1/4 in 2-1/2 in 2-1/2 in 2-1/4 in 2-3/10 in
Max rip to left of blade 22 in N/A N/A 7-3/4 in N/A
Max rip to right of blade 32-1/2 in 25 in 25 in 18 in 25 in
Max width of dado/ dado capacity 13/16 in 13/16 in 13/16 in 13/16 in N/A
Arbor size 5/8 in 5/8 in 5/8 in 5/8 in 5/8 in
No load speed/ RPM 4800 rpm 3650 rpm 4800 rpm 5000 rpm 5300 rpm
Voltage 110-120V 120V 120V 120V 120V
Bevel angle range 0° – 45° -2° to 47° 0° – 45° -2° to 47° -1° to 46°
Max bevel capacity 45 47 45 47 46

Features

Rack & Pinion Telescoping Fence System Smart Guard System “Tool-less” modular blade guard system SquareLoc Rip fence Dual-Field Motor
Onboard storage system SquareLock rip fence Blade guard Smart Guard System Self aligning rip fence
Rolling stand Soft-start circuitry Dead-on cam-locking rip fence
Arbor lock Two pole slide system
Accessories 10″ 24-Tooth Carbide Blade, 2x Blade Wrenches, rolling stand, blade guard assembly, push stick, miter gauge, rip fence 10 in. 40-tooth carbide-tipped blade, throat plate insert, smart guard system, rip fence, miter gauge, push stick 32T carbide-tipped blade, rip fence, miter gauge, push stick, and wrenches Rip Fence, Miter Gauge, Smart Guard System, Push Stick, Blade Change Wrenches 24-tooth SKILSAW Carbide-tipped blade for ripping, miter gauge, self-aligning fence, guard system including anti-kick back device, insert plate, push stick and wrench

Warranty&Support

Warranty 3 year limited manufacturer warranty 1 Year Manufacturer Warranty, 30 day Money back gaurantee 1-year warranty 1 Year Manufacturer Warranty, 30 day Money back gaurantee 1 Year Manufacturer Warranty, 180 day Money back gaurantee
Customer Support
Online Manual
Phone
Email

Table Saw Reviews

1.DEWALT DWE7491RS

If you want to finish your DIY project and you need to a circular saw mounted under a table, the DEWALT DWE7491RS is exactly what you are looking for. With so many models available on the market, more and more people think that buying a circular saw is a piece of cake. However, things are a bit different and choosing the right model for your needs can be an exhausting task. Nowadays, people who are interested in buying such a heavy-duty tool invest in the first one they stumble upon. This is a very big mistake. These tools are so different that you can easily end up with a device that doesn’t fulfill your needs. The DWE7491RS unit measures 24.5 x 31 x 31 in and weighs less than 100 pounds. It is a sturdy unit that features a rolling stand and provides maximum stability. Having a powerful 15-amp motor, this device is great for a plethora of reasons. It can make cuts ranging in depth from 2-1/4 inches at 45 degrees to 3-1/8 inches at 90 degrees. Moreover, it comes with a 1-1/2 inches dust port of the top of the blade and 2-1/2 inches dust port at the back end of the device. Its dual capability helps it capture dust both below and above the blade while leaving your work area clean at all times. After reviewing several models, we can truly say that the DEWALT DWE7491RS is among the highest ranked in the current market. It is a great unit that will surely meet all your requirements.

PROS

CONS

It comes with a powerful motor
Extra wide ripping capacity
Flip-over fence
Easy to setup

VERDICT

If you are a passionate DIY worker, the DEWALT DWE7491RS is a great option to consider when investing in a table saw. It is powerful, accurate and provides maximum stability. It comes with a plethora of impressive features that will definitely meet your requirements.

2. Bosch 4100-09

When it comes to both appliances and power tools, Bosch is one of the most recognized brands out there. It is equipped with a 15-amp electric motor which has 3650 rpm. Moreover, the diameter of its blade is 10 inches, while the rip capacity is about 25 inches. As compared to other similar units, the Bosch 4100-09 comes with a plethora of safety features, including an arbor lock mechanism which helps you change the blade with ease. In what regards the design of this unit, it’s important to know that it is pretty compact. It measures 39.13 x 30 x 20.9 inches and weighs no more than 60 pounds. Also, keep in mind that the distance between the work surface and the floor is only 37.5 inches. Thanks to the unique properties of the carbide material, the unit is considered to be one of the most durable tools on the market. It is able to cut through pine and plywood which are the softer types of wood out there. Considering its impressive features and powerful motor, the Bosch 4100-09 will certainly be a welcome addition to any workshop.

PROS

CONS

15-amp motor with 3650 rpm
It has an arbor lock mechanism
Safe and secure
Sturdy construction

VERDICT

The Bosch 4100-09 is surprisingly good. It has a powerful motor with 3650 rpm and an arbor lock system thanks to which you can change its blade with ease. It comes with a nice bundle of accessories and features, being a great addition to any workshop.

3. Makita 2705

If you are new in this industry, it’s important to know that Makita is one of the most reputable power tool companies out there. For this reason, in our comparison table, you will find one of their top-of-the-line modes, the Makita 2705. It comes with a 15-amp motor which has 4800 rpm. This is more than enough power to cut almost any wood. Despite its large table, the unit has a compact design. The blade guard system has a cam lock, so it can be easily adjusted while the dual guards allow you to cut any wood any size and shape. As far as the safety goes, it is everything okay. Although that some important features are lacking, it still has two independent anti-kickback mechanisms and a blade guard that is designed great. After testing this incredible tool, we can honestly say that it can cut wood with incredible accuracy.

PROS

CONS

Safe operation Not very portable
Powerful motor
Great price
Great warranty

VERDICT

The Makita 2705 is a 10-inch contractor saw that comes with a versatile design for a lot of applications. It suits best DIY workers who want to create small projects at home without hiring professional help. Although it is a bit heavy and not very portable, it still is an option worth taking into consideration.

4. Bosch GTS1031

With so many models available on the market, it is not easy to find a high-quality model. If you don’t pay attention to details when choosing a product, you will end up purchasing a unit that doesn’t worth the money. However, this is not the case of the Bosch GTS1031. When it comes to sheer power, this Bosch model is among the best. It comes with a powerful 15-amp motor that delivers 5000 rpm. More than that, it is able to cut as deep as 3-1/8 inches at 90 degrees and 2-1/4 inches at 45 degrees. The GTS1031 measures 22.5 x 22.5 x 13 inches and weighs 52 lbs.. It is compact and relative light, so you can easily carry it using one hand. The fact that it has a rip capacity of 18 inches is a major perk because it can easily cut large sheets of material including flooring, hardwoods, plywood and more others. As compared to other similar units, this model is equipped with modular safety features. This means that all the features can be easily attached and detached, depending on your preferences. All in all, this great tool is surely an option worth taking into consideration.

PROS

CONS

Portable and very easy to use Short warranty
It comes with a 15-amp powerful motor with a no load speed of 5000 RPM
Affordable price
Packed with modular safety features

VERDICT

The Bosch GTS1031 is a high-quality model powered by a 15-amp motor that delivers 5000 rpm. It is well designed and very helpful. Apart from the technical specification and details outlines above we have tried to review this model to find especially the advantages and benefits of using this tool.

5. SKILSAW SPT70WT-01

The SKILSAW SPT70WT-01 is one of the most efficient circulars saw on the market. It has everything you need. It is quality, durable and has a great price. It comes with a 15 amp dual-field motor that delivers 5300 rpm and 25 inches rip cutting capacity on the table top. The maximum depth of cut at 90 degrees is 3-1/2 inches while at 45 degrees is 2-1/4 inches. The SPT70WT-01 measures 19.9 x 23.4 x 13.4 inches and weighs 49 lbs.. It is a lightweight unit that comes with a compact design. Its lightweight feature makes it portable and easy to transport from a place to another. Thanks to its 10 in. 24 tooth carbide rip cutting blade, this SKILSAW model has the ability to rip any type of wood. As compared to other similar units, this one comes with a plethora of useful accessories, such as rip fence, table insert, barrier guard assembly, miter gauge, push stick, anti-kickback device, blade wrench, hex wrench and manual.

PROS

CONS

Sturdy construction Poor blade quality
Lightweight and portable
It comes with multiple accessories
Able to rip any type of wood

VERDICT

The SKILSAW SPT70WT-01 is our last offer. It is a circular saw that comes at an amazing price. It is safe, very easy to use and incredibly durable. Also, it is portable, so you can move it from a corner to another with ease.

What’s Behind our Ratings


high-quality table saw
If you are interested in buying a new model, then do not hesitate to read the following lines. Before making a purchase, you need to consider several things. Rip, miter, bevel and cut are just some of the things you will be able to do with this tool. More than that, you can amplify its functionality by adding several accessories to it. As compared to traditional saws, the circular saw has the ability to move the material towards the blade, which means a much more precise cut. However, in order to help you find a unit that meets your requirements, here are some of the most important things to look for.

  • The blades

  • The blades of a table saw are usually divided based on several factors, including diameter, arbor size, speed, application, and well as number f teeth and materials used in their construction. Most tools are equipped with 10 or 12 inches blades. This is the medium size, but there are also models that come with blades as small as 5 inches or as large as one hand. Since they are able to cut various different materials, including the most solid ones, most models have carbide or carbon blades. You may also find diamond-tipped teeth blades, but they are a bit more expensive. The number of teeth is usually between 24 and 80 and you need to decide whether you want a saw with left or right tilt. The direction in which the blade tilt is very important and it can provide plenty of advantages.

  • The motor

  • It is equipped with plenty of important components and the motor is one of them. It differs from a model to another, but this depends on various circumstances. For example, the smaller models have direct-drive motors that run on 120V circuits. In comparison to all those powerful motors that produce up to 5 hp, the motors designed for smaller units can produce up to 2 hp. This power is enough for cutting thinner material sheets. Keep in mind that the 5hp motors operate on 240V.

  • The fence

  • Another important element of every model is the fence. Without the fence, you cannot make a precise cut. The most common type of fence that you can find on these units is the T-square fence. However, before getting into that let’s go over the most important characteristics a quality fence must have. First of all, it is important to know the role of the fence. It allows for hassle-free adjustment both vertically and horizontally. Also, it must be placed on the rails firmly, so you don’t encounter resistance while moving it. However, if this happens you can apply wax. Now, let’s have a look at the T-square fence. It is so popular because it is easy to adjust and maneuver. More than that, it is extremely accurate.

  • The miter gauge

  • The miter gauge is a part of the unit that moves into the slot. With a miter gauge, you can make a square cross-cut. You just have to set it at 90 degrees and push the board toward the blade. Also, by setting it at 45 degrees, you can make angled cuts. However, when using the miter gauge, make sure the wood is not moving. Secure it to the gauge using a clamp. With a miter gauge, you can also make compound cuts. You just have to set the miter gauge and the level of the blade at the same desired angle.

  • Safety features

  • As you probably might think a quality model must have some safety feature. This is not a toy; this is a powerful tool which can cause serious injury. That’s why, safety features like splitters, anti-kickback or riving knives are there to minimize these risks. When you have your fingers inches away from the blades that spin with a power hard to imagine, you need to be very careful. Therefore, safety features like the ones above will help you keep your hand intact.

What to Know About


table saw
To get the best use of something it is very important to understand it and to have complete information regarding it. It is a powerful tool that is used for different types of works. When it comes to a woodworking machine, many options are available, but to use it to its maximum potential you need to take into account several factors. First of all, it is important to know that there are many different types of circular saws available in the marketplace. In what regards the portability, there are two types of saws including portable and stationary. As you may have already read, most of our reviewed saws are portable and easy to move from a place to another. However, in this article, you will find information about each type of saw as well as about their classifications.

  • Portable saws

  • These tools can be classified into three types, such as the compact, bench top and jobsite saw. As compared to the stationary models they are smaller and more lightweight. Furthermore, the heavier materials used in their construction are seriously reduced to keep their weight down. Most units are equipped with a 15 amp 120V motor which delivers no more than 2 hp. As it was mentioned before, the size matters and it is an important factor to consider when purchasing a woodworking machine.

  • Compact saws
  • The compact saws are a bit more advanced than the bench top saws. They are equipped with plenty of impressive features and characteristics including direct-drive motors. In spite of their lightweight feature, most compact saws are powerful and provide a lot of benefits. With additional features like stands and extra surfaces made of cast iron, most of them resemble full-size models. However, they still have a rip capacity much smaller than other saws.

  • Benchtop saws
  • The bench top saws have a compact yet ergonomic design. Thanks to their lightweight feature, more and more people prefer to use them in their workshops. Despite the fact that they are not equipped with wheels, they can be considered portable, because they are very small. As such, they can easily be carried and transported from a place to another by almost anyone. Also, in comparison to the jobsite saws, the benchtop saws have a very limited rip capacity.

  • Jobsite saws
  • The jobsite saws are the most solid and robust units out there. They are more rugged in their construction than the bench top or compact models. However, they are still an option worth taking into consideration.

  • Stationary machine

  • As compared to portable saws, these units weight more and are much larger than the portable ones. Also, they deliver more power and are more accurate. Although they are not portable, they can be installed on a mobile base for easy transportation. There are three types of stationary saws, such as the cabinet, contractor and hybrid model.

  • Cabinet saw
  • The cabinet saws are the most powerful woodworking machines. They are durable and strong enough to resist for a long period of time. Most people prefer them because of their impressive features which make them precise and extremely accurate. The motors of these units usually run on 240V and produce from 3 to 5 hp. As mentioned before they are very heavy. Most models weight more than 500 pounds, however, this makes them very stable.

  • Contractor saw
  • The contractor saws are specially designed for professionals and experienced workers. They are equipped with large outboard induction motors and belt drive. They weight less than the cabinet models, but they still are difficult to move around. They weight as much as 200 to 300 pounds, meaning that they are not as portable as the hybrid saws.

  • Hybrid saw
  • The hybrid machines are a middle ground between the industrial cabinet and contractor saws. Most of them are equipped with leg stands, but you can also find models that come with full enclosures. The hybrid machines have huge motors and safety features that you can only find on the cabinet models.

What Are the Advantages of Using It?

Purchasing a quality model is one of the most important investments of a wood-worker. It is a necessary item that is seen in every woodcutter shop. Without this equipment, you won’t be able to complete all your projects based on the hardwood. We all agree that this is a dangerous tool. Also, after doing some research we can truly say that it causes several injuries to the user. However, it also has a lot of advantages besides this drawback. Therefore, in you are interested in finding out more about the advantages of using such a tool, take a look below.

  • It provides straight cuts

  • The circular saw is a versatile woodworking tool that has the ability to straight cut. It is capable of cutting, ripping, squaring and even applying different shapes to the wood. Since most of your projects are based on wood art, then a machine that provides a perfectly straight cut is exactly what you need.

  • It helps you make wood cabinets and furniture

  • Every woodworker needs a tool to make furniture and build cabinets. The wood cabinets are vital in any building because they increase the storage capacity of any room. Whether small or big, a cabinet should be done only with a quality model. This powerful tool is capable of cutting big pieces of wood into different sizes and shapes for building cabinets and making furniture.

  • It provides smooth cuts

  • You cannot build wood cabinets or make furniture without a quality tool that provides maximum accuracy and precision. There are still many people who prefer to use the manual saw rather than the electric saw, but the main disadvantage of using the standard saw is that it doesn’t provide smooth and clean cut. On the other hand, despite the fact that electric saws cut the wood at a very high speed and reach in the middle of the wood with no effort, they provide a very smooth cut.

  • It is portable

  • One of the most important benefits of this tool is that it is portable and it can be moved from a place to another with ease. Most of them weigh less than 60 lbs. and feature a compact design. The ergonomic design and lightweight feature are a major perk because this helps you transfer it from your work area to any other place.

Know Before You Purchase

If you are interested in buying a quality tool, but there are too many models to choose from, then, this article is exactly what you need. Below, you will find some of the most important things to consider before buying such a powerful tool.

  • Match power to your needs

  • If you are new in this industry, you need to know one important thing. Every model is equipped with a motor. The amount of power and the motor are strongly related to the project you have. In simple terms, it depends on what you are cutting. For example, a 2 hp motor can easily rip wood of 2 inches thick, while other hard materials require a 5 hp motor. Keep in mind that the 5 hp motor is found only on cabinet saws.

  • Consider the table size

  • Choosing a table saw is a daunting task because the market is overflowing with powerful tools designed to help you cut different hard materials. As it was mentioned above, there are plenty of factors you need to consider when making a purchase and the size of the unit is one of them. As compared to small tables, a large unit provides you with more space where to cut a large sheet of plywood. However, if you don’t have enough space to place the table, you can add an extension table to a smaller unit. It can be mounted to the side of the unit and removed after use.

  • Check the construction

  • After reviewing several models we can truly say that metal components are more durable than plastic. Cast iron, for example, is a durable material that provides the most stable surface. It is capable of minimizing vibration and is much heavier than steel or aluminum. Every quality model has a smooth surface and sturdy legs that ensure stability. In what regards the motor and its components, you probably know that it’s quite difficult to check them by looking. However, any product should have a warranty and for a quality product, the manufacturer should offer at least a 3-year warranty.

Comments are closed.